FAQ
The Difference of jindaquan brightener and PE WAX
21 Apr 2016 - Plastic brightener,Plastic brightening agent
PE WAX:
1. mainly made of PE and wax, also containing lots of fillers
2. gloss and brightness improvement is limited , and precipitation
(delamination , dropping )problem will happen when adding too much, which bring
bad influence on plastic reprocessing when printing, painting , spraying ect.
3. may have good gloss at first , but very quickly, loss the gloss
3. effect the plastic transparency
4. hard to pass Food grade
5. much higher addition percentage
A-388 brightener / brightening agent:
1. mainly made of organic esters , more environmental , FDA passed .
2. increase the plastic inner fluidity and give good permanent brightness
in the surface, no bad effect on plastic reprocessing.
3. lower addition percentage 0.4% only .
This is the picture after adding our A-388 Brightening agent
